Advertisement
To change a time value, press the appropriate timer box to be
changed and the next screen will appear:
Once the Enter/Return button is pressed, the changes will be
saved and the previous screen will displayed.
Note: If the DUAL TAMP SETUP is selected instead of the
SINGEL TAMP SETUP (in the SETUP screen), the save areas
are very similar and the timer change screens are identical as the
Single Tamp screens. See below:
Press the timer
box to activate
the cursor. Use
the arrow up,
down, left, right
to change time.
Enter / return
will save the new
values and return
to the previous
screen.
Esc button; will
return to the
previous screen
without saving
changes.
Advertisement
