Advertisement
8
Chapter
Pneumatic System
Air Filter and Shut-Off
See Chapter 12 for Detailed for Pneumatic Drawings
and individual part numbers
The air filter and shut off valve is located at the back of the stand
and is positioned so that you can bleed your air lines before
introducing air into the labeling system. Loveshaw has placed a
Lock Out / Tag Out style shut off on the system for your safety.
You will need to provide the appropriate fitting for your air
connections to the unit. The connection port is ¼" NPT.
You must disconnect air before draining any collected water.
The air pressure is controlled by a regulator which is located
behind the safety cover. A minimum operating pressure of 45 psi
is required to properly operate the air piloted valves. A specific
factory setting will be determined based on the type of unit
ordered and may vary from 50-55 + psi depending on the size of
Advertisement
