Advertisement
vacuum pad. Adjusting the position is covered here while
adjusting the air pressure is covered in Chapter 11 Maintenance as it
requires removal of the rear cover.
Blow Tube Assembly P/N: .14018-LT
The air tube is just to function as an assist. The label will want to
Adjusting the
curl away from the vacuum pad for various reasons and the blow
Blow Tube
tube is to ensure that it lays back and flat against the pad for the
Position
vacuum to hold it until application.
As a starting position, center the air stream on the width of the
label and within the first 1/4 of the length of the label. Fine tune
angle as required. Tighten clamp on blow tube after adjustment.
Advertisement
