Handling and transport
Handling should be carried out by suitably equip-
ped qualified personnel, and with equipment ap-
propriate for the weight of the appliance in com-
pliance with accident prevention regulations.
When being moved, the unit should always be kept
in a vertical position.
The weight of the appliance is out of balance to-
wards the compressor side.
To lift the unit use pipes with a suitable diameter
and thickness for the weight of the appliance.
Access to inner parts
Loosen the fixing screws
Remove the access panel.
Manutention et transport
La manutention doit être effectuée par un personnel
qualifié, équipé comme il se doit et avec des outils
appropriés au poids de l'appareil, conformément
aux normes de prévention contre les accidents.
Durant les opérations de manutention, l'unité doit
toujours rester en position verticale.
Le poids de l'appareil est déséquilibré du côté du
compresseur.
Pour le levage, utiliser des tubes ayant un diamètre
et une épaisseur appropriés au poids de l'appareil.
Accès aux parties internes
Dévisser les vis de fixation.
Enlever le panneau d'accès.
29
NexPolar ME Bus
1