Plate Present Sensor S5 - Kodak DirectView CR 825 Adjustments And Replacements

ADJUSTMENTS AND REPLACEMENTS
10DEC05

PLATE PRESENT SENSOR S5

AR4825-1
Page
Prerequisites:
120 of 160
1 Remove the
To Remove:
CONNECTOR
CONNECTOR
PLATE
PRESENT
LED
2 SCREWS
CASSETTE HANDLING
2 SCREWS
BRACKET
PLATE
PRESENT
2 SCREWS
SENSOR
S5
H194_1011GCB
H194_1011GC
AY.
1 Manually move the
down.
2 Remove:
• 2 SCREWS
• BRACKET
Caution
The parts must be installed in the correct
positions.
3 Observe the positions of the PLATE
PRESENT LED and the PLATE
PRESENT SENSOR S5 and the
CONNECTORS.
4 Disconnect the CONNECTOR from the
PLATE PRESENT LED.
5 Remove:
• 2 SCREWS
• PLATE PRESENT LED
6 Disconnect the CONNECTOR from the
PLATE PRESENT SENSOR S5.
7 Remove:
• 2 SCREWS
• PLATE PRESENT SENSOR S5
Replacements
EXTRACTION BAR