Maintenance Mode
9 Block register
■ Click [Settings] then [Block register].
(1) Block register
1. Select Group.
2. Click on [Edit].
3. Select the Block No..
4. Enter the Block name (16 characters max.)
5. Click on [Change] and select the Block icon.
6. Click on [OK].
• When registering multiple Blocks, repeat the steps 1 to 6.
7. Click on [Done].
NOTE:
To cancel the Block registration, click on [Cancel] after selecting the unit and then click on [Done].
②
P5416904
Management Mode
< This is required. >
①
⑥
Control Mode
③
■ The Block name is written using
④
alphanumeric characters. Special
characters cannot be used.
⑤
■ The maximum limit for the Block
name is 16 characters.
⑦
29