Table of Contents
Advertisement
Maintenance Mode
5 Unit register
■ Click [Settings]; then [Unit register].
(1) Unit register
1. Click on the button on the list (Unit).
2. Select the unit.
3. Click on [Edit].
4. Enter the unit name.
5. Click on [Change].
6. Select the unit icon.
7. Click on [OK].
8. Click on [Done].
③
⑥
24
Management Mode
< This is required. >
②
⑦
Control Mode
NOTE:
When performing changes or corrections to the structure of the
unit or the RC, click on [Check connection] and recheck the unit.
When checking the connection, uninstall the other central
controllers and after the checking is completed, connect them
again.
Also, do not access from a computer other than the one used to
check the connection.
Do not perform Check connection when an alarm is generated.
①
④
⑤
⑧
P5416904
Advertisement
Table of Contents
