Table of Contents
Advertisement
Maintenance Mode
13 Outdoor unit setting
■ This item can only be set by authorized service personnel.
■ Click on [Settings]; then [Outdoor unit].
(1) Outdoor unit setting
1. Select the Outdoor unit.
2. Click on [Edit].
3. Change the setting.
4. Click on [OK].
• When registering multiple Outdoor units, repeat the steps 1 to 3.
5. Click on [Done].
NOTE:
When multiple units are selected at the same time, the setting value of the smallest unit is indicated.
②
③
NOTICE:
● Only Capacity Control and Lower Noise of the Outdoor unit can be set from this unit.
Perform the setting of the Outdoor unit function selection item via the Outdoor unit.
● Because the item configurable may differ depending on the Outdoor unit, please refer to the installation
and operation manual of the air conditioning unit for further information.
P5416904
< Optional >
①
④
NOTICE:
● If Operation Lower Noise function is set, also
check the box for Capacity Control.
● There is a possibility that the capacity control
function will not work correctly if an outdoor unit
which cannot support the Lower Noise function is
set to [Lower noise].
● Both Capacity Control and Lower Noise functions
will take effect 15 minutes after being set.
⑤
37
Advertisement
Table of Contents
