Table of Contents
Advertisement
1. Click on [Check connection] and start the connection verification of the AC.
When there is no connection information, the Check connection is executed automatically. In case there
is a Check connection executed once with information for the AC, do not perform the Check connection
until the button can be selected. The procedures for the Check connection are indicated below:
Use the registered data and
execute the Check connection.
2. Click on [Cancel] to interrupt the Check connection
3. After the Check connection is completed, the Outdoor unit, Thermal Storage unit and the Indoor unit will
be indicated by a [○].
4. The process status of the Check connection is indicated by the progress bar.
44
Click on [Check connection].
Cancel the Check connection.
Cancel the Check connection.
Cancel the Check connection.
Cancel the registered data and
execute the Check connection.
P5416904
Advertisement
Table of Contents
