Table of Contents
Advertisement
Maintenance Mode
12 Indoor unit setting
■ If a detailed setting is necessary, only authorized service personnel will select [Maintenance Mode].
■ When performing this setting, always turn the Indoor unit power OFF. If it is not turned OFF the setting will not
function.
■ Click on [Settings] then [Indoor unit].
(1) Indoor unit setting.
1. Select the Indoor unit.
2. Click on [Edit].
3. Change the setting.
4. Click on [OK].
• When checking the content of the function, it is available in Function Description.
• When registering multiple Indoor units, repeat the steps 1 to 4.
5. Click on [Done].
NOTE:
1. In case the setting is restored in the Factory state, click on [Initialization].
2. When multiple units are selected at the same time, the setting value of the smallest unit is indicated.
②
P5416904
Management Mode
< Optional>
①
④
Control Mode
⑤
③
35
Advertisement
Table of Contents
