Figure 6-11 Disconnecting A Power Line By A Power Tap; Figure 6-12 Connecting And Disconnecting Power Lines By A Terminal Block - Hitachi S10mini LQS070 Hardware Manual

For disconnection of main line A: Remove fuse A.
For disconnection of main line B: Remove fuse B.

Figure 6-11 Disconnecting a Power Line by a Power Tap

Main line A
Communication
power supply A

Figure 6-12 Connecting and Disconnecting Power Lines by a Terminal Block

Main line A
Signal wire CAN-H
Signal wire CAN-L
Drain
Power line V-
Power line V+
Connect the connector terminals of the power supply line
(V+) at left and right side of the TB .
V+ (red)
CAN-H (white)
Drain
CAN-L
(blue)
V-(black)
Power tap
Fuse A Fuse B
Shot key
diode
Power cable
or wire
V- V+
Communication
power supply
V+ (red)
CAN-H (white)
Drain
CAN-L
(blue)
V- (black)
Communication
power supply B
− 41 −
6 CABLING
Main line B
Main line B