Maintenance Mode
8 Group register
■ Click on [Settings] then [Group register].
(1) Group register (Unit - Facility Unit)
1. Select RC Group.
2. Click on [Edit].
3. Select the Group No..
4. Enter the Group name (16 characters max.).
5. Click on [Change] and select the Group icon.
6. Click on [OK]
• When registering multiple Groups, repeat the steps 1 to 6.
7. Click on [Done].
NOTE:
To cancel the Group registration, click on [Cancel] after selecting the unit and then click on [Done].
②
⑥
NOTE:
To modify the Group, always erase the Schedule of this Group before performing the modification.
28
Management Mode
< This item is required. >
①
Control Mode
③
■ The Group name is written using
④
⑤
■ The maximum limit for the Group
alphanumeric character. Special
characters cannot be used.
name is 16 characters.
⑦
P5416904