64-Point Basic Unit; Name And Function Of Each Part; Mv-A64Dr Mv-D64Dr; Mv-D64Dt 600 - Hitachi MICRO-EHV+ Applications Manual

Chapter 2 Specifications

2.15 64-point Basic unit

2.15.1 Name and function of each part

Name and function of each part
(6)Communication port cover
Without the front cover
(13)Mounting hole
(17)RUN/STOP
(16)Power terminal
No. Item
(1) POW LED
(2) OK LED
(3) RUN LED
(4) STATUS LED
(5) IN / OUT LED
(6) Communication port cover
(7) Ethernet port cover
(8) Battery cover
(9) Option board cover
(10) Expansion connector cover
(11) Terminal block cover
Type
Weight
(8)Battery cover
(7)Ethernet port cover
(18)USB communication port
(20)Ethernet port
switch
(22)Battery connector
(19)Serial port
(21)USB memory port
Setting switch
USB memory operation LED
indicates that the power is supplied.
represents the result of the self-diagnosis in the basic unit.
Normal: ON, Abnormal: blink or OFF (Refer to Section 3.26 Troubleshooting)
displays the operating condition. (RUN: ON, STOP: OFF)
blinks until the state in which PLC can RUN from power-up (500ms ON / 500ms OFF) or during
writing the program to FLASH memory.
When signal status is ON, LED lights up accordingly.
The cover for RUN/STOP switch, serial port and USB communication port.
The cover for Ethernet port and USB memory port.
The cover for the battery connector.
The cover for the option board connector.
Avoid contact with the printed circuit board when you remove the cover.
The cover for the expansion connector.
The cover for the terminal block.
MV-A64DR, MV-D64DR, MV-D64DT, MV-D64DTPS
MV-A64DR: 730g (1.61 lb.)
MV-D64DT: 600g (1.32 lb.)
(9)Option board cover
(12)DIN rail installation clip
(11)Terminal block cover
(23)Option board connector
(14)Input terminals
(15)Output terminals
Description
2 – 16
MV-D64DR: 655g (1.44 lb.)
MV-D64DTPS: 600g (1.32 lb.)
(11)Terminal block cover
(1)POW LED
(2)OK LED
(3)RUN LED
(4)STATUS LED
(5)IN / OUT LED
(10)Expansion connector cover
(24)Expansion connector
(13)Mounting hole