19. Fit and connect all controllers to the tractor as per the
operator's manuals supplied with each controller.
20. Connect all electrical and hydraulic fittings between
the tractor and WEEDit unit.
21. Adjust WEEDit chassis air bag ride height valve until
the first WEEDit sensor on the boom is near 1 100mm
from the ground to lens of the sensor, (system needs to
be powered up / air compressor working).
!
CAUTION
Other factors such as drawbar height (either side of
450mm), tyre pressures (sprayer & boom) and airbag
pressures will also influence this height. Fine tune
sensor heights at the completion of the install.
9
Need help?
Do you have a question about the WEED-IT and is the answer not in the manual?