Advertisement
BOOM TRANSPORT, UNLOADING & SET-UP GUIDE
VERSION 4
4
BT-OMWEED-TRANS v4
Remove half of the bolts to
make joining easier. The bolts
may need to be loose to assist
with alignment of holes.
7. Reverse the WEEDit unit (or very carefully take outer
boom to the unit) to connect the booms together.
8. Join boom together. Add all of the bolts and washers
leave them loose to assist with the boom alignment.
Advertisement
Need help?
Do you have a question about the WEED-IT and is the answer not in the manual?