Croplands WEED-IT Setup Manual page 3

Note these photos are
from an earlier model boom
& (unpainted) brackets.
All transport brackets
should be painted yellow.
IMPORTANT – be very
careful re stability, especially
as the support brackets are
removed. Ideally use slings
rather than fork tynes.
5. Raise the upper boom, slowly, making sure it clears the
structure below (note the left-hand side needs to clear
the 3 x vertical "bumper" bars). Once clear, tow the
WEEDit forwards and lower outer boom to a suitable
working height.
6. Remove front & rear transport stands.
3