Enable/Disable Onboard Soundblaster( Jsb )( Optional ); Clear Cmos(Jcc); Enable/Disable Onboard Ethernet( Jlan )( Optional ) - QDI Advance 12 Series Manual

Enable/Disable onboard SoundBlaster(JSB)
( Available on Advance 12-C/-CL )
If you want to use the onboard SoundBlaster( Creative
set JSB as pin1&pin2 closed. Otherwise, set JSB as pin2&pin3 closed for disabling this
function.Please set JSB as pin2&pin3 closed when using PCI or ISA sound card.
Clear CMOS (JCC)
If you want to clear CMOS, unplug the AC power supply first, close JCC (pin1 & pin2) once,
set JCC back to the normal status with pin2 & pin3 connected, then power on the system.
Enable/Disable onboard Ethernet(JLAN)
( Available on Advance 12-L/-CL/-AL )
If you want to use the onboard Ethernet, set JLAN with pin1&pin2 closed. Otherwise, set
JLAN with pin2&pin3 closed for disabling this function.
Chapter 2
®
CT5880 PCI Hardware Sound
Enable onboard
SoundBlaster:
Disable onboard
SoundBlaster:
Normal status:
Clear CMOS:
(Unplug the AC power supply)
Enable onboard
Ethernet
Disable onboard
Ethernet
Manual for Advance 12 series
1
2
3
JSB
1
2
3
JSB
JCC
3 2 1
1
3 2
JCC
1
2
3
JLAN
1
2
3
JLAN
)
,