Overclocking Jumper Setting (Jfsb); Enable/Disable Onboard Audio(Jsd) - QDI KinetiZ 7A Manual

Overclocking Jumper Setting (JFSB)

Jumpers labeled JFSB is located on the mainboard providing users wi t h CPU overclocking
feature. The host bus speed can be set as 100/133MHz. Refer to the chart below for the
locati o n of these jumpers, and the table for information on how to set them.
Enable/Disable on-board audio(JSD)
If you want to use the on-board audio, set JSD with pin2 & pin3 closed (default).
Otherwise, s et JSD with pin1 & pin2 closed for disabling this function.
Normal status:
Clear CMOS:
(Unplug the AC power supply)
JFSB
CLOSE
OPEN
Enable on-board audio:
Disable on-board audio:
Manual for KinetiZ 7A
chapter 2
JCC
JCC
JFSB
1
JFSB
1
HCLK
100
133
JSD
JSD