Manual Transmission; Automatic Transmission; Manual And Automatic Fax Redial - Brother MFC-925 Owner's Manual

Brother owner's manual fax machine fax-920, fax-930, mfc-925, fax-940 e-mail
Hide thumbs Also See for MFC-925:
Table of Contents

Advertisement

58
C H A P T E R S I X
See
"One Touch
Dialling"
chap. 8
See
"Super
Tel-Index
Dialling"
chap. 8
DO NOT use • curled paper
• folded paper
• paper with staples
• paper with paste
DO NOT use • cardboard
DO NOT use • paper on which correction fluid has been used
Make sure documents written with ink are completely dry.

Manual Transmission

Manual transmission lets you hear the dial tone, ringing and fax
receiving tones before sending the fax.
1
Insert the document face down in the feeder.
2
Pick up the handset and listen for a dial tone—OR—press Speaker
Phone.
3
Enter the fax number you want to call. (You can enter the digits
using the dial pad or you can enter a One Touch or Super Tel-Index
number.)
4
When you hear the fax tone, press Start.
5
If you're using the handset, hang up.

Automatic Transmission

This is the easiest way to send a fax.
IMPORTANT: Do not pick up the handset—OR—press Speaker
Phone.
1
Insert the document face down in the feeder.
2
Enter the fax number you want to call. (You can enter the digits
using the dial pad or you can enter a One Touch or Super Tel-Index
number.)
3
Press Start.

Manual and Automatic Fax Redial

If you're sending a fax manually and the line is busy, you can retry the
number by pressing Redial/Pause.
1
Press Redial/Pause.
2
Press Start. (Only for Ireland)
If you're sending a fax automatically and the line is busy, the machine
will automatically redial up to 4 times (3 times for Ireland) at 2 minute
intervals.
• wrinkled paper
• ripped paper
• paper with paper clips
• paper with tape attached.
• newspaper, or fabric.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fax-920Fax-930Fax-940 e-mail

Table of Contents