Setting Up Message Manager; Setting The Message Store - Brother MFC-925 Owner's Manual

90
C H A P T E R T E N
3. DOC:ON, VOICE:OFF All memory is used to store fax
4. DOC:OFF, VOICE:ON
5. DOC:OFF, VOICE:EXT You need an external answering machine
6. DOC:OFF, VOICE:OFF Incoming faxes are not stored in memory,

Setting Up Message Manager

You must set up Message Manager in the following order:
1
Set the Message Store.
2
Record the Message Manager's Outgoing Message (TAD
MESSAGE).
3
Turn Message Manager Plus OFF (Menu, 9, 1) if it is ON (Only for
FAX-930).
4
Activate Message Manager (TAD) Mode by pressing

Setting the Message Store

Select the setting from the descriptions of "Flexible Memory Settings".
1
Press Menu, 8, 1. The screen prompts you to choose a DOC
(Document) setting.
DOC:OFF
SELECT { } & SET
Press Z or X to select ON (or OFF).
2
3
Press Set. The screen prompts you to choose a VOICE setting.
VOICE:ON
SELECT { } & SET
messages—no voice messages will be
stored.
All memory is used to store voice
messages—no fax messages will be stored.
Incoming faxes will print on paper. You
can use the Paging feature, and retrieve
voice messages remotely.
connected to the fax machine for this
setting. Incoming faxes are not stored in
memory, but will print on paper. Voice
messages are stored in the external answering
machine.
but will print on paper. Voice calls are not
stored in memory.
.