Table of Contents
Advertisement
Advanced Receiving Operations
Operation from an External or Extension
Telephone
If you answer a fax call on an external or extension phone, you can make
your machine take over by using the Activation Code. When you press
the Activation Code
See
If the machine answers a voice call and double-rings for you to take over,
"F/T Ring
use the Deactivation Code # 5 1 to take the call at an extension phone.
Time"
The Deactivation Code is used only in F/T mode.
in this
chapter
If you answer a call, and no one is on the line, assume you're receiving a
fax. At the machine phone, press Start, then hang up. At an extension
phone, press
At an external phone, press
disconnected (the screen displays RECEIVE) before you hang up. (Your
caller will have to press Start to send the fax.)
If you accidentally pick up an extension phone when a fax message is
being received, you may disrupt the transmission or render some portions
unreadable.
Extension telephones are not permitted in some countries, in such a case
See
the deactivation code will not work.
"Outgoing
Message
The Remote Activation Code also can be used by your callers. When you
(OGM) of
are using an external TAD, your outgoing message (OGM) should end
External
with the statement "to send a fax, press
TAD"
chap. 2
For F/T (Fax/Tel) Mode Only
When the machine is in F/T mode, it will use the F/T Ring Time (F/T
pseudo-ringing) to alert you to a voice call. If you're at the machine, you
can lift the handset to answer.
If you're at an extension phone, you'll need to lift the handset during the
F/T Ring Time and press # 5 1 between the F/T pseudo-rings. If no one
is on the line, or if someone wants to send you a fax, send the call back
to the machine by pressing
5 1, the machine starts to receive a fax.
5 1, wait for fax receiving tones (chirps), then hang up.
5 1 and wait for the phone to be
5 1.
S E T U P R E C E I V E
5 1".
45
Advertisement
Table of Contents
