Table of Contents
Advertisement
98
C H A P T E R T E N
Remote Retrieval
Programming the Paging Number
1
Press Menu, 8, 6.
Press Z or X until the screen displays
2
PAGING
3
Press Set. The screen prompts you to enter your pager number.
PAG#:
ENTER & SET
4
Enter your paging number up to 20 digits. This is the telephone
number which your machine must call.
5
Press Set.
6
Press Stop to exit.
You cannot change a Paging number remotely.
This section is for the FAX-930 and FAX-940 E-mail. (If you have the
FAX-920 or MFC-925, please see chapter 9 for your remote fax options.)
You can call your machine from any touch tone phone (or remote Group
3 fax machine set for tone) and use a Remote Access Code and other
button presses to retrieve voice (and fax) messages. You can also
program and change some settings for your Message Manager.
Using the Remote Access Code
1
Dial your machine phone number from a touch tone phone.
2
When your machine answers and beeps, immediately enter your
Remote Access Code.
3
The machine signals the kinds of messages received:
1 long beep—Fax message(s)
2 long beeps—Voice message(s)
3 long beeps—Fax and Voice message(s)
No beeps—no messages
Advertisement
Table of Contents
