Airstream TC4-2N6F User Manual page 23

TO PROGRAM THE TEMPERATURE CURVE (CONT'D)
When the six points of the temperature curve have been specified,
activate the curve as follows.
To activate the temperature curve
Press the push-button once again. The word OFF appears
flashing on the display.
Turn the adjustment knob clockwise one notch and leave it in
this position for at least 10 seconds. The word ON appears
flashing on the display and after 10 seconds, the temperature
curve pilot light turns on, indicating that the temperature curve is
now activated.
Set the parameter selection knob to ROOM.
NOTE: When the temperature curve is activated, the current target
room temperature can be viewed at any time by setting the parameter
TO DISPLAY CURRENT SET POINT
TO DISPLAY / MODIFY CURRENT DAY NUMBER
When the temperature curve is activated, the current temperature
set point and day number can be displayed at any time. The current
day number can also be adjusted in order to move forward or back-
ward on the temperature curve.
Set the parameter selection knob to SET POINT / T
The current temperature set point appears on the display.
Press the push-button. The current day number is displayed.
Use the adjustment knob to set the day number to the desired
value.
o
CURVE.
TC4-2N6F.rev.07
23