Table of Contents
Advertisement
The room set point and the points of the temperature curve can be
adjusted only if the temperature curve is deactivated:
If the temperature curve pilot light is off, the temperature curve is presently
deactivated and you can proceed with the adjustment.
If the temperature curve pilot light is on, the temperature curve is presently
activated. Before proceeding with the adjustment, deactivate the curve as
follows.
To deactivate the temperature curve
Set the parameter selection knob to SET POINT/ T°CURVE. The
current room set point appears flashing on the display.
Press the push-button repeatedly until the word ON appears flashing
on the display.
Turn the adjustment knob counterclockwise one notch and leave it
in this position for at least 10 seconds. The word OFF appears
flashing on the display and after 10 seconds, the temperature curve
pilot light turns off, indicating that the temperature curve is now
deactivated. Set the parameter selection knob to ROOM.
TO ADJUST THE ROOM TEMPERATURE SET POINT
Be sure the temperature curve is deactivated (read the
instructions above).
Set the parameter selection knob to SET POINT/ T°CURVE. The
current room set point appears flashing on the display.
Using the adjustment knob, adjust the set point to the desired
value.
TC4-2N6F.rev.07
21
Advertisement
Table of Contents
