Safety Information; Main Functions - ETEKCITY EB4074S Manual

Digital Body Weight Scale
Modell No.: EB4074S
English

Safety Information

IMPORTANT: Please read, understand, and
comply with all of the instructions provided in this
manual before using the device. Failure to comply
with the instructions given in this manual and/
or using the device in ways other than the ones
mentioned in this manual may result in serious
injury and/or damage to the product.
• The glass platform is slippery when wet. Make
sure the platform is dry before stepping on for
measurement.
• Consult your primary-care doctor or physician
before making changes to your diet, exercise
plans and/or physical activities.
• This scale is not intended for commercial use.
• To weigh safely and accurately, please stand in
the center of the platform and stand still until a
result is calculated.
• DO NOT strike or drop the scale.
• DO NOT stand on the edge of the scale or jump
on it.
• DO NOT stand on the scale platform for
a prolonged period of time or when not in
weighing operation.
• DO NOT store or operate near heat sources or
in humid environments.
• Always place the scale on a hard, dry and flat
surface before measurement.
3
• Handle the scale with care, as it is a precision
instrument.
• Clean the scale with a damp cloth and avoid
getting water or any other liquid inside the
scale.
• DO NOT use chemical or abrasive cleaning
agents to clean the scale.
• Keep the scale in a cool environment with dry
air.
• Always keep the scale in a horizontal position,
do not store vertically.
• If the scale fails to turn on, check whether the
batteries are installed correctly. Replace the
batteries if necessary.
• If an error appears on the display or if the scale
does not turn off automatically, remove the
batteries for 3 seconds, then reinstall them.
• DO NOT overload the scale (max. weight
capacity: 180 kg / 400 lb).
• DO NOT mix new and used batteries or
different battery brands to power the scale.
• If the scale is not in use for an extended period
of time, remove the batteries to ensure battery
conservation and to extend the scale service
lifetime.

Main Functions

1. Weighing platform
2. Digital display
3. Unit selection
4. Battery compartment
5. Anti-skid padding
2
1
3
4
5