Set-Up; Operation - ETEKCITY EB4074S Manual

Set-Up

The 2 AAA 1.5V batteries are preinstalled in the
scale battery compartment. Slide open the
battery compartment cover located on the
backside of the scale and remove the plastic
film from the batteries. Re-apply the batteries
under the correct polarity and re-seal the battery
compartment in order to activate the scale.

Operation

Weight Measurement
1. For best accuracy, place the scale on a hard,
flat floor. Avoid carpet or soft surfaces.
2. Gently step on the scale. The scale will
automatically activate.
3. Remain standing evenly on the scale, without
moving or shifting your feet or body while the
scale processes your results. The scale will
then display and flash your final results
NOTE: For accuracy, the digital scale may trigger
automatic calibration when physically lifted
and moved or when the unit of measurement
is changed. Should a 'C' appear on the digital
display at any time, wait for the
digital screen to display '0.0', then step on to
weigh with accuracy.
Converting Weight Units
Step on the scale platform to activate the scale.
Then, press the unit conversion button located
on the backside of the scale to convert between
pounds and kilograms. The LCD display will show
the new unit of measurement
as you switch.
Battery Replacement
1. Slide open the battery compartment cover on
the backside of the scale.
2. Take out the used batteries and dispose them
properly.
3. Install 2 new AAA 1.5V batteries, taking note
of the correct polarity displayed within the
battery compartment.
4 5