Table of Contents Package Contents Package Contents 1 x Digital Body Weight Scale Specifications 2 x 1.5V AAA Batteries (Pre-Installed) Safety Information 1 x Quick Start Guide Function Diagram Before First Use Operation Specifications • Using the Scale • Replacing the Batteries •...
READ AND SAVE THESE INSTRUCTIONS SAFETY INFORMATION Please read and follow all instructions and developing a slight crack. If you see a crack, safety guidelines in this manual. contact Customer Support (see page 14). General Use • The glass platform is slippery when wet. Always make sure the platform and your •...
Page 4
Safety Information (cont.) • Avoid standing on the scale for a long Batteries period of time. • Do not mix new and old batteries. • Do not overload the scale. Maximum weight • If the scale is not in use for a long period capacity is 400 lb / 180 kg.
Before First Use Open the battery compartment on the underside of the scale. Remove the included AAA batteries. [Figure 1.1] Remove the plastic strip. Replace the batteries. Follow the guidelines in the battery compartment to match the + and – terminals.
Operation Using the Scale Note: Press the unit switching button on the underside of the scale to switch between pounds (lb) and kilograms (kg). Place the scale on a hard, flat surface. Note: Using the scale on soft surfaces such Figure 2.1 as carpets and mats will cause inaccurate measurements.
Replacing the Batteries Open the battery compartment on the underside of the scale. Remove the old batteries and dispose of them properly. Install 2 new 1.5V AAA batteries. Make sure the polarities match. [Figure 3.1] Close the battery compartment, place the scale on a hard, flat surface, and wait for the display to show “...
Clearing the Scale Cleaning the Scale Use a slightly damp cloth to clean the surface of If the scale has been moved or flipped upside down, the scale, followed by a soft, dry cloth to wipe it must be cleared to ensure accurate results. away the remaining moisture.
Troubleshooting Problem Possible Solution Open the battery compartment cover and remove the plastic strip. Scale does not turn on. Replace the batteries (see page 8). Insert batteries under the correct polarity as marked in the battery compartment. Display backlight does not come on when stepping on Customer Support Scale may be malfunctioning.
Page 11
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
Etekcity Corporation (“Etekcity”) warrants this product to the original purchaser to be free from defects in Etekcity will not be liable for indirect, incidental, or material and workmanship, under normal use and consequential damages in connection with the use of the conditions, for a period of 2 years from the date of product covered by this warranty.
Page 13
This warranty is made by: from unauthorized sellers. Etekcity’s warranty extends only to products purchased from authorized sellers Etekcity Corporation that are subject to Etekcity’s quality controls and have 1202 N. Miller St., Suite A agreed to follow its quality controls. Anaheim, CA 92806 All implied warranties are limited to the period of this limited warranty.
Customer Support If you have any questions or concerns about your new product, please contact our helpful Customer Support Team. Etekcity Corporation Support Hours 1202 N. Miller St., Suite A Monday—Friday Anaheim, CA 92806 9:00 am —5:00 pm PST/PDT Email: support@etekcity.com Toll-Free: (855) 686-3835 *Please have your order invoice and order ID ready before contacting Customer Support.