Etekcity EB4410B - Digital Body Weight Scale Manual

Main Functions

1. Scale platform
2. Digital display
3. Unit selection

Set-Up

Open the battery compartment cover located on the back of the scale. Remove the four 1.5V AAA batteries from their plastic film and apply the batteries under the correct polarity. Reseal the battery compartment in order to activate the scale.

Operation

Weight Measurement

1. For best results, place the scale on a hard, flat surfaces. Avoid carpet or soft surfaces.
2. Step on the scale, then step off. Wait for the screen to display " 0.0 " before using.
   

Converting Weight Units

1. Apply pressure onto the weighing platform to activate the scale.
2. Press the unit conversion button on the back of the scale to convert units from pounds (lb) to kilograms (kg).
3. Place the scale back onto a hard, flat surface when you are ready to measure.

Maintenance

Battery Replacement

1. Open the battery compartment on the back of the scale.
2. Remove the old batteries and dispose of them properly.
3. Install 4 new AAA 1.5V batteries, making sure they are placed under the correct polarity.
4. Replace the battery compartment cover.

NOTE: The scale may need to be cleared after replacing the batteries.

Clearing the Scale
If the scale has been moved or flipped upside down, it must be cleared to ensure accurate results.

Specifications

Troubleshooting

Safety Information

Please read and comply with all of the instructions and warnings provided in this manual before using the product. Failure to comply with the instructions and warnings provided herein may result in inaccurate results and/or damage to the product itself.

• The glass platform is slippery when wet. Make sure the platform is dry before stepping on for measurement.
• Consult your primary-care doctor or physician before making changes to your diet, exercise plans, and/or physical activities.
• This scale is not intended for commercial use.
• To weigh safely and accurately, please stand on the center of the platform and stand still until a result is calculated.
• DO NOT strike or drop the scale.
• DO NOT stand on the edge of the scale or jump on it.
• DO NOT stand on the scale platform for a prolonged period of time or when not in weighing operation.
• Always place the scale on a hard, dry, and flat surface before measurement.
• Handle the scale with care, as it is a precision instrument.
• Clean the scale with a damp cloth and avoid getting water or any other liquid inside the scale.
• DO NOT use chemical or abrasive cleaning agents to clean the scale.
• Keep the scale in a cool environment with dry air.
• Always keep the scale in a horizontal position; do not store vertically.
• If the scale fails to turn on, check whether the batteries are installed correctly. Replace the batteries if necessary.
• If an error appears on the display or if the scale does not turn off automatically, remove the batteries for 3 seconds, then reinstall them.
• DO NOT overload the scale (max. weight capacity: 440 lb / 200 kg).
• If the scale is not in use for an extended period of time, remove the batteries to ensure battery conservation and to extend the scale service lifetime.
• Check the scale before using. Do not use the scale if it is damaged in any way.
• Do not strike or hit the scale. Do not use the scale if the glass is cracked or broken. While tempered glass is stronger and fractures more safely than ordinary glass, it may shatter unexpectedly after developing a slight crack. If you see a crack, contact Customer Support immediately.

Customer Support

If you have any questions or concerns about your new product, please contact our helpful Customer Support Team.
Etekcity Corporation
1202 N. Miller St. Suite A Anaheim, CA 92806
Toll-Free: (855) 686-3835 Email: support@etekcity.com
Support Hours
Monday - Friday:
9:00 am - 5:00 pm PST/PDT
*Please have your order invoice and order ID ready before contacting Customer Support.

Connect with us @Etekcity

Questions or Concerns? (855) 686-3835 • support@etekcity.com