Etekcity ENS-L221S-SUS - Luminary Smart Nutrition Scale Manual

Package Contents

1 x Luminary™ Smart Nutrition Scale
1 x USB Charging Cable
1 x Quick Start Guide

Specifications

Weight Capacity	353 oz / 22 lb / 10 kg / 10000 mL
Units	oz / lb: oz / g / mL (water/milk) / fl'oz (water/milk)
Increments	0.05 oz / 1 g
Auto-Off	30–300 seconds (adjustable in VeSync app)
Battery	300mAh Li-ion Battery
Input	5.0V 500mA (USB Type-C Charging)
Dimensions	9.1 x 6.7 x 1.1 in / 230 x 170 x 27 mm

Function Diagram

1. LED Display
2. Unit Selection Button
3. Power/Zero Button

4. Locking Key (Hold Button)
5. USB Charging Port
6. Anti-Skid Pads

Display Diagram

1. Battery Charging Indicator
2. Milk
3. Water (Liquid)
4. Tare Indicator

5. Weight Value
6. Measurement Unit
7. Bluetooth ® Indicator

VeSync App Setup

Note: The VeSync app is continually being improved and may change over time. If there are any differences, follow the in-app instructions.

1. To download the VeSync app, scan the QR code or search "VeSync" in the Apple App Store® or Google Play Store.
   Note:
   • This scale uses the VeSync app, not the VeSyncFit app.
   • For Android™ users, you may need to select Allow to use VeSync.
2. Open the VeSync app. If you already have an account, tap Log In. To create a new account, tap Sign Up.
   Note: You must create your own VeSync account to use third-party services and products. These will not work with a guest account. With a VeSync account, you can also allow your family and friends to use your smart nutrition scale. Even if you switch to a new device, your nutrition records will still be available on your VeSync account.
3. Make sure your phone has Bluetooth^® turned on.
4. Tap + in the VeSync app and select your smart nutrition scale.
5. Follow the in-app instructions to connect your phone to your smart nutrition scale.
   Note: You can change the name and icon at any time in the smart nutrition scale settings.

Using Your Scale

Note:

• For accurate results, always place the scale on a hard, flat surface, and keep the scale away from dirt, dust, vibrations, wind, air currents, and electromagnetic interference.
• When you turn on the scale, choose units, or use the tare function, wait for the display to read "0.00" before measuring.

General Operation

1. Place the scale on a hard, flat surface.
2. Tap to turn on the scale. Make sure the display reads "0.00".
3. Tap UNIT to select your desired measuring unit, which will show on the right of the display.
4. Place your item on the scale.
5. Wait for the reading on the display to stabilize.
6. When you're done, reset the scale by removing all items from the scale. If the display doesn't read "0.00", press to reset the weight to zero.

ZERO / Tare Function
Whenever you measure items inside a container, you can use the tare function to remove the container's weight from the final measurement.

1. Tap to turn on the scale. Make sure the display reads "0.00". If the screen does not display "0.00" automatically, tap to adjust to zero.
2. Place the container on the center of the scale.
3. Wait for the reading on the display to stabilize. The display will show the container's weight.
4. Tap to tare the weight of the container. The screen will now display "0.00".
5. Place the liquid or items into the container. The scale will measure the contents without including the weight of the container.
6. When you're done, reset the scale by removing all weight and tapping again.

Unit Conversion
To change the unit of measurement, tap UNIT until the display shows your desired unit of measurement.

Hold Mode
Tap HOLD to lock the measurement data on the display. Tap HOLD again to unlock the display.
Note: In hold mode, will not work. You can still use UNIT to switch between units.

Automatic Power Off
To save battery power, the scale will automatically power off after 180 seconds of inactivity.

Manual Power Off
Tap and hold for 2 seconds to turn off the scale.

Troubleshooting

If your problem is not listed, please contact Customer Support.

Important Safety Information

READ AND SAVE THESE INSTRUCTIONS
To avoid damage to this scale, please read and follow all instructions and safety guidelines in this manual.

Scale

• Do not exceed the 22 lb / 10 kg weight capacity, as it will damage the scale. An error indicator will appear on the LED display if the limit is exceeded.
• The scale is IPX6 water resistant, which means it can withstand most liquid spills without permanent damage. However, we still recommend wiping the scale dry with a soft cloth after any spills to keep it in optimal condition.
• Handle with care. This scale is not intended for commercial or heavy-duty use.
• Keep the scale in a cool, dry place. Avoid exposure to damp environments or extreme temperatures.
• Household useonly.

Batteries

• The display will show "LO " when the battery needs to be charged.
• Insert the USB charging cable into the USB charging socket.
• Plug the USB charging cable into a DC 5V adapter and plug into an outlet. You can also plug the cable into a powered USB outlet.
• When charging, the ( ) on the display will light up.

Customer Support

If you have any questions or concerns about your new product, please contact our helpful Customer Support Team.
Etekcity Corporation
1202 N. Miller St., Suite A
Anaheim, CA 92806
Support Hours
Mon–Fri, 9:00 am–5:00 pm PST/PDT
Email: support@etekcity.com
Toll-Free: (855) 686-3835
*Please have your order invoice and order ID ready before contacting Customer Support.

Connect with us @Etekcity