IBM E Server i Series Manual page 68

&D2 - DROP LINE WHEN DTR GOES OFF
F8 - USE 9600 BPS ONLY
*I8 - USE 9600 BPS ONLY
&E2 - USE ERROR CORRECTION
Initialization strings for ZOOM: For ZOOM VFXV32BIS, the initialization string for
the iSeries system is:
AT&FE0M0S0=2&C1&D2&K3&S1
AT - ATTENTION
&F - LOAD FACTORY ASYNC SETTINGS
E0 - DISABLE ECHO
M0 - DISABLE SPEAKER
S0 = 0 NO AUTO ANSWER
&C1 - CD ON ONLY WHEN CONNECTED
&D2 - DTR GOING OFF DROPS LINE AND TURNS OFF AUTO ANSWER
&K3 - USE RTS/CTS FLOW CONTROL
&S1 - DSR FOLLOWS CD
For ZOOM VFXV32BIS, the initialization string for the PC is:
AT&F&C1E0M0S0=0&D2&K3N0S37=9
AT - ATTENTION
&F - LOAD FACTORY ASYNC SETTINGS
&C1 - CD ON ONLY WHEN CONNECTED
E0 - DISABLE ECHO
M0 - DISABLE SPEAKER
S0 = 0 NO AUTO ANSWER
&D2 - DTR GOING OFF DROPS LINE AND TURNS OFF AUTO ANSWER
&K3 - USE RTS/CTS FLOW CONTROL
N0 - USE S37 REGISTER FOR SPEED
S37 = 9 - CONNECT AT 9600 ONLY
Initialization string for Intel 144e FaxModem: For Intel 144e FaxModem, the
initialization string for the iSeries system is:
AT&F&C1E0M0V1X4F8S0=2
For Intel 144e FaxModem, the initialization string for the PC is:
AT&F&C1E0M0V1X4F8S0=0
Initialization string for USRobotics Sportster 28.8: For USRobotics Sportster 28.8, the
initialization string for the iSeries system is:
AT&FE0M0S0=2&N6
For USRobotics Sportster 28.8, the initialization string for the PC is:
AT&FE0M0S0=0&N6
Initialization string for other OEM modems: For other OEM modems, try using the
7852 initialization string. It should work for most OEM ASYNC-only modems. You
may also try this basic string:
AT&FnS0=N
(Where n and N are numbers, and N in S0=N only applies for iSeries and represents
the number of rings before the modem answers a call.)
When using the basic string, verify that &F is not using options that are not
supported in the remote environment. You may need to try all &F selections to find
out whether one will work.
Reset the modem for synchronous use: Use this section for resetting the 7855, 7857,
and 7852 modems for use with electronic customer support.
62
iSeries: iSeries Access for Windows Operations Console