Plan For Your Operations Console Migration - IBM E Server i Series Manual

Plan for your Operations Console migration

If you already have a twinaxial or Operations Console connection, you can migrate
your console in the following ways.
20
iSeries: iSeries Access for Windows Operations Console
Figure 2. iSeries Navigator and Operations Console configuration on the
same network
However, if the network adapter and configured OS/400 LIND and the service
network adapter as defined by the service host name are on separate networks,
then an additional PC LAN adapter is required.
Figure 3. iSeries Navigator and Operations Console configuration on separate
networks
Migrate from a local console directly attached to the server to a local
console on a network
Use these instructions to migrate from a local console directly attached to the
server to a local console on a network.
Migrate from a twinaxial console to an Operations Console
Use these instructions to migrate from a twinaxial console to Operations
Console.
Migrate from an Operations Console to a twinaxial console
Use these instructions to migrate from Operations Console to a twinaxial
console.