IBM E Server i Series Manual page 56

10. Click Finish.
11. Click OK.
Install AS400 Operations Console Connection Modem for
Windows 2000
You must install the Operations Console connection modem that is shipped with
Operations Console in order for a local console to communicate with the server.
Only use these instructions if you are configuring a local console directly attached
to the server or a local console directly attached to the server with remote access
allowed.
To install:
10. Select the communications port where you are going to install the Operations
11. Click Next.
12. If the Digital Signature Not Found window appears, click Yes.
50
iSeries: iSeries Access for Windows Operations Console
1. Click Start —> Settings —> Control Panel, and then click Modems.
2. If the Install New Modem window appears, go to the next step. Otherwise, if
you are currently in the Modem Properties window, click Add.
3. Select Don't detect my modem; I will select it from a list, then click Next.
4. Click Have Disk...
5. Click Browse...
6. Navigate to drive:\path\Client Access\Aoc\Inf\ cwbopaoc.inf where drive: is
the drive where iSeries Access for Windows is installed.
Note: The default installation path C:\Program Files\Ibm\Client
Access\Aoc\Inf\cwbopaoc.inf.
7. Click Open, then click OK.
8. Select the communications port where you are going to install the Operations
Console cable (for example, COM1).
9. Click Next.
1. Click Start —> Settings —> Control Panel.
2. Click Phone and Modem Options.
3. Click the Modems tab.
4. Click Add.
5. Select Don't detect my modem; I will select it from a list, and then click
Next.
6. Click Have Disk...
Note: If you know the full path to the Operations Console Connection driver
(cwbopaoc.inf), enter it here. Then, go to step 7. If you do not know the
path, continue with step 6.
7. Click Browse...
Navigate to drive:\path\Client Access\Aoc\Inf\ cwbopaoc.inf where drive: is
the drive where iSeries Access for Windows is installed.
Note: The default installation path C:\Program Files\Ibm\Client
Access\Aoc\Inf\cwbopaoc.inf.f)
Click Open.
8. Click OK. Operations Console Connection should be listed.
9. Click Next.
Console cable (for example, COM1).