Install As400 Operations Console Connection Modem - IBM E Server i Series Manual

If you do not have iSeries Access for Windows installed, use the iSeries Setup and
Operations CD-ROM to install it:
1. Insert the iSeries Setup and Operations CD-ROM in the CD-ROM drive.
2. Select the iSeries Access for Windows option to start the installation.
3. Wait until the IBM iSeries Access for Windows window appears.
4. To continue with the setup program, click Next and follow the prompts.
5. If you are installing iSeries Access for Windows for the first time, you have to
6. To ensure the minimum configuration, select Custom or Full install and select
7. Click Next and follow the prompts.
8. Apply the latest service pack (program temporary fix (PTF)) for iSeries Access
9. If you have the iSeries Operations Console Update CD-ROM, SK3T-4114-02, install
Apply iSeries Access for Windows service packs
You should have the latest Service Pack program temporary fix (PTF) for iSeries
Access for Windows and the latest level of iSeries Access for Windows on your PC.
Service packs are available in a PC-executable form at the following Web sites:
v The iSeries Access for Windows Service Packs page:
v The IBM FTP site:

Install AS400 Operations Console Connection Modem

If you are configuring a local console directly attached to the server or a local
console directly attached to the server with remote access allowed, you need to
install the AS400 Operations Console Connection Modem.
48
iSeries: iSeries Access for Windows Operations Console
Refer to iSeries Access for Windows - Setup, SC41-5507-03
installation assistance.
ensure that you have at least a minimum configuration for running Operations
Console. If you are only adding the Operations Console component, add only
the components necessary to meet this minimum configuration.
at least the following components:
Note: The Operations Console component is not available using the Typical or
PC5250 User options.
a. Required Programs
b. 5250 Display and Printer Emulator (if IBM Personal Communications (V5.5
CSD 1 minimum) is not installed)
You do not need a license to use 5250 Display Emulation just for Operations
Console, even though the window says that you do.
Important: If your Operations Console configuration is going to support
only the remote control panel, you do not need to install an emulator.
Operations Console.
c.
for Windows.
the update CD-ROM now.
http://www.ibm.com/eserver/iseries/clientaccess/casp.htm
ftp://ftp.software.ibm.com
Navigate down to the directory path:
as400/products/clientaccess/win32/v5r2m0/servicepack.
for further