IBM E Server i Series Manual page 55

Install AS400 Operations Console Connection Modem for Windows 98/Me
Use these instructions to install the AS400 Operations Console Connection
Modem for Windows 98/Me.
Install AS400 Operations Console Connection Modem for Windows NT
Use these instructions to install the AS400 Operations Console Connection
Modem for Windows NT.
Install AS400 Operations Console Connection Modem for Windows 2000
Use these instructions to install the AS400 Operations Console Connection
Modem for Windows 2000.
Install AS400 Operations Console Connection Modem for Windows XP
Use these instructions to install the AS400 Operations Console Connection
Modem for Windows XP.
Install AS400 Operations Console Connection Modem for
Windows 98/Me
You must install the Operations Console connection modem that is shipped with
Operations Console in order for a local console to communicate with the server
using the Operations Console cable. Only use these instructions if you are
configuring a local console directly attached to the server or a local console directly
attached to the server with remote access allowed.
To install:
1. Click Start —> Settings —> Control Panel, and then click Modems.
2. If you are currently in the Modems folder, click Add, and then Next.
Otherwise, if you are at the Install New Modem window, click Next. The PC
should find the new modem and report its location.
3. Select Don't detect my modem; I will select it from a list, then click Next.
4. Click Have Disk...
5. Click Browse...
6. Navigate to drive:\path\Client Access\Aoc\Inf\ cwbopaoc.inf where drive: is
the drive where iSeries Access for Windows is installed.
Note: The default installation path is C:\Program Files\Ibm\Client
Access\Aoc\Inf\cwbopaoc.inf
7. Click Open, then click OK.
8. Select Operations Console Connection, and then click Next.
9. Select the communications port where you are going to install the Operations
Console cable (for example, COM1).
10. Click Next.
11. Click Finish.
12. Click OK.
Install AS400 Operations Console Connection Modem for
Windows NT
You must install the Operations Console connection modem that is shipped with
Operations Console in order for a local console to communicate with the server
using the Operations Console cable. Only use these instructions if you are
configuring a local console directly attached to the server or a local console directly
attached to the server with remote access allowed.
To install:
Chapter 4. Set up Operations Console
49