9. Installing the Heat Tubes
Warning:
unplugged and the power turned off!
9 A. Inserting the Heat Tubes
1. Remove Hand Wheels from right side cover.
2. Remove the right and left cabinet covers.
3. Remove left and right heater rubber cushion (2) from support brackets (4).
4. Insert heat tube through the core of the roller (longer heat tube on top).
5. Align ends with flat spots with flat side of rubber cushions.
6. Replace left and right heater rubber cushions.
NOTE: There is a lip on the inside of the roller; you will have to carefully cantilever the heat
tubes
1. Screw 2. Rubber cushion 3. Heat tube 4. Support Bracket 5. Roller
4
2
Do not attempt this with the machine plugged in. Machine must be
Gfp 865DH-4
Lip
15
March 2021