Removing The Print Hold Down Assembly; Loading Film - Gfp 865DH-4 Operating Manual

15. Removing Print Hold-down Assembly
1. For roll-to-roll applications and mounting, it may be necessary to remove the print hold down
assembly.
2. Unscrew the knurled thumb screws securing the Print Hold-down Assembly.
3. Lift off and remove assembly.

16. Loading Film

1. Swing out the top supply shaft.
2. Loosen the fastening screws on the film core adaptor on one side of the supply shaft, then slide
it off the supply shaft.
3. Slide the film rolls onto the supply shaft.
Gfp 865DH-4
21
March 2021