Installing Heat Tube; Insert Heat Tube - Gfp 455 TH Operating Manual

10. Installing Heat Tube

Warning: Do not attempt this with the power on!
A. Insert Heat tube
1. Remove gap Hand wheel from right side cover
2. Remove the right and left cabinet covers.
3. Remove left and right heater support brackets
4. Insert heat tube through the core of the roller, aligning
Ends with the flat spot in the supports
5. Replace left and right heater support brackets
1. Screw 2. Rubber cushion 3. Heat tube 4. Support Bracket 5. Roller
4
2
Gfp 400 Series
15
January 2011