Installing Take Up Reel - Gfp 230 C Operating Manual

12. Installing Take up reel

1. Loosen the pressure-adjusting nut near the right cabinet, and the rewind
tube can then be removed from the machine
2. Slide a cardboard tube onto the rewind tube by rotating away from the core
stop clip
3. Install the rewind tube onto the positioning sleeves with the core stop clip
pointing away from the Nip Rollers or toward rear of the machine with
core stop clip positioned on top of the rewind tube. (Note: Pay attention
to the direction of the core stop clip, or the application will be affected.)
4. The rewind tube is driven by friction. The friction and tension will be
increased with a left turn of the pressure-adjusting nut, and a right turn will
decrease them.
ote:
Adjust the rewind tube pressure-adjustment nut to allow the
backing paper to be removed and the film to enter the rollers evenly
1. Cardboard tube 2. Core Stop clip 3. Rewind Tube 4. Left side cabinet
5. Positioning sleeve 6. Positioning sleeve 7. Pressure-adjusting nut 8. Right side cabinet
Gfp 230 C
15
June 2012