Specifying 802.1X Security Settings - JDS Uniphase HST-3000 User Manual

Specifying
802.1x security
settings
f Select Video VOD VC, and then enter the virtual path
indicator (VPI) and virtual channel indicator (VCI) for
the third video channel, which topically carries the
RTSP video on demand (VOD) signaling.
NOTE:
The VPI and VCI selections for each virtual channel (VC)
should be different. If your network does not require the
additional virtual channels, ensure that the VPI and VCI
selections do not match those in use.
g Select VOD TX ATM PCR, and then specify the
transmit peak cell rate for the third video channel.
The Data settings are specified.
The 802.1x Settings menu appears only if you are using the
IPoE data mode and "802.1x Security" is set to "Yes" on the
Data Settings menu.
The 802.1x Settings are used to access a secured network.
The following procedure describes how to specify the 802.1x
settings.
To specify 802.1x settings
1 Press the 802.1X soft key. You may need to scroll left or
right to find it.
The 802.1x Settings screen appears.
HST-3000 IP Video Testing User's Guide
Chapter 2 IP Video Testing
Specifying test settings
13