Setup Items - Omron THERMAC NEO Series Connection Manual

4

Setup Items

Set communication settings of the Display with GP-Pro Ex or in offline mode of the Display.
The setting of each parameter must be identical to that of External Device.
"3 Example of Communication Setting" (page 8)
4.1 Setup Items in GP-Pro EX
Communication Settings
To display the setup screen, from the [Project] menu, point to [System Settings] and select [Device/PLC].
Setup Items
SIO Type
Speed
Data Length
Parity
Stop Bit
Flow Control
GP-Pro EX Device/PLC Connection Manual
Select a SIO type for communicating with an external device from "RS232C", "RS422/485
(2-wire)", and "RS422/485 (4-wire)".
Select speed (bps) between the External Device and the Display.
Select the data length (bit) for communication. Select either "7" or "8".
Select how to check parity. Select any of "None", "Even" and "Odd".
Select stop bit length. Select either "1" or "2".
The communication control method to prevent overflow of transmission and reception data
is displayed.
Temperature Controller CompoWay/F Driver
Setup Description
18