Advertisement
5
Cable Diagram
The cable diagram shown below may be different from the cable diagram recommended by OMRON
Corporation. Please be assured there is no operational problem in applying the cable diagram shown in this
manual.
•
The FG pin of the main body of the External Device must be D-class grounded. Please refer to the manual of
the External Device for more details.
•
SG and FG are connected inside the Display. When connecting SG to the External Device, design the system
not to form short-circuit loop.
•
Connect the isolation unit, when communication is not stabilized under the influence of a noise etc..
Recommended cable
•
RS232C
Temperature Controller
E5EN-
E5AN-
•
RS485
Temperature Controller
E5EN-
E5AN-
E5CN-
E5AR-
E5ER-
E5GN-
E5ZN-
GP-Pro EX Device/PLC Connection Manual
-FLK
-FLK
-FLK
-FLK
-FLK
-FLK
-FLK
-FLK
-FLK
Temperature Controller CompoWay/F Driver
Cable
Twist pair shield cable
AWG28 or higher
Cable
AWG28 or higher
AWG24 to 14
23
Advertisement
