Water Separator With Safety Separator - BÖWE P12 Instruction Manual

7. Functional Units

7.17. Water Separator With Safety Separator

The safety separator is integrated in the water separator. The water phase from the water
separator flows continually to the safety separator. The solvent runs to the clean tank. The
safety separator is protected against overfilling with a sensor. The process water from the
safety separator is automatically polled after each cycle by a sensor and drained into the
process water tank.
Rinsing and pumping out with program P54 semi-automatically cleans the water separator.
1 Water separator
2 Safety separator (integrated)
3 Ventilation and aeration atmospheres
4 Tank aeration
5 Aeration for filling machine
6 Sight-glass, water separator
7 Connection, rinsing with pump
8 Sensor for process water
9 Drain, process water
48
10 Sight-glass, safety separator
11 Water overflow
12 Drain, water separator
13 Drain, safety separator
14 Distillation inlet
15 Perc overflow to clean tank
16 Drying inlet
17 Drain, water phase from water separator
7.
7.17
707769-09-0
P12 /P15 /P18