Functional Units; Tanks - BÖWE P12 Instruction Manual

7. Functional Units

7.1. Tanks

The work tank contains solvent, which is used over and over. The solvent is pumped from the work
tank to the cage. If there is not enough solvent in the work tank, fresh solvent is taken from the clean
tank. After the garments have been cleaned, the solvent is pumped back to the work tank or to the
distillation system..
The clean tank holds clean solvent that has been recovered from the distillation and drying
processes. When the clean tank overflows, it fills up the work tank again.
Tank 3 is an extra tank for special applications. If an optional second centrifuge filter is used, this is
allocated to the third tank. This permits separate cleaning of light and dark products.
Sacrificial anodes in the tanks protects against corrosion.
P12
Work tank
Clean tank
Tank 3
P15
Work tank
Clean tank
Tank 3
P18
Work tank
Clean tank
Tank 3
All three tanks are self-cleaning, which means that the sloping bottoms remain nearly free of dirt.
1 = Work tank
2 = Clean tank
3 = Tank 3 (extra tank)
37
Filling volume
110 l (29 US gal)
70 l (18.5 US gal)
90 l (23.8 US gal)
Filling volume
145 l (38.3 US gal)
95 l (25.9 US gal)
90 l (23.8 US gal)
Filling volume
155 l (40.9 US gal)
100 l (26.4 US gal)
90 l (23.8 US gal)
Recommended filling amount
60 l (15.8 US gal) (high level)
70 l (18.5 US gal)
60 l (15.8 US gal) (high level)
Recommended filling amount
75 l (19.8 US gal) (high level)
95 l (25.9 US gal)
75 l (19.8 US gal) (high level)
Recommended filling amount
90 l (23.8 US gal) (high level)
100 l (26.4 US gal)
90 l (23.8 US gal) (high level)
7.
7.1
707769-05-0
P12 /P15 /P18