6. Operation
6.1.12. Performing a Test Run
Load the machine with test garments (note the filling capacity!)
Start program P2 (see 6.2 Automatic Operation - Brief Instructions) and check the settings and
operating values listed under Point 5 during the cycle and correct if necessary.
To ensure proper drying, do not load the machine with more than the maximum filling capacity.
Never take out garments that have not dried completely.
6.1.13. Refrigeration Unit
Attention:
Do not allow cooling agent to escape into the atmosphere during
operation, servicing work and decommissioning of refrigeration units.
You must keep a record of the quantities of cooling agent used and
present this record to the authorities upon demand.
Only people who have the necessary special knowledge and technical
equipment are authorized to service and decommission refrigeration
units.
35
P12 /P15 /P18