Opening The Loading Door - BÖWE P12 Instruction Manual

6. Operation

6.1.11. Opening the Loading Door

Never leave the loading door standing open!
Before each start, make sure that the loading door is closed.
During longer standstills, concentrations of the solvent gas can form.
You can unlock the door with the
th
Starting with the 11 minute, you cannot open the loading door until after you have started the
"DEODORIZING" program (P43) and the horn has stopped sounding.
Once the machine has been turned on, it is not possible to open the loading door until the
"deodorizing" program (P43) starts and the horn sounds to signal the end of the program.
Attention: When neither current nor compressed air is present or
Caution
The trained user is permitted to carry out an EMERGENCY opening only
when the program has stopped and the cage is not turning. Before the
emergency opening, carefully open the button trap cover in order to
release any overpressure.
Caution
After removing garments that have not finished drying, place them in a solvent-tight and solvent
resistant transport container.
Emergency release
There is an 8-mm (.3 in) ∅ bore hole in the paneling, to the left of the loading door, that you can
use to release the lock.
Use a screwdriver to press the bolt to the left and open the loading door.
After correcting the error, close the loading door and cover and continue the program by pressing
the "Start" button.
when the program has been interrupted, a mechanical
EMERGENCY opening is possible with the help of a tool.
34
button for up to 10 minutes.
703887-03-B-01
P12 /P15 /P18