Multiple Resolution Transmission
Use this feature to select separate resolution settings for each page of the fax you're
sending. This could be useful if you're sending a fax with photos and letters, or some
pages with small print and others with normal print. Resolution settings return to
STANDARD after the fax is sent. (See Resolution, page 6-6)
1
Insert the originals in the feeder, and then press
Menu/Set, 3, 4.
2
to select resolution for page 1, and then press Menu/Set.
Use
or
3
Repeat Step 2 for subsequent pages.
4
Press
Stop/Exit
LCD shows
5
Press 1 if you want to select additional settings.
The LCD returns to the SETUP SEND menu
—OR—Press 2 if you are finished choosing
settings, and go to Step 6. The LCD prompts
you to enter the fax number you want to call.
6
Enter the fax number you're calling.
7
Press Fax Start.
To copy an original using multiple resolutions, press Copy in Step 6.
Pause
Press Redial/Pause to insert a pause between numbers. Each key press adds a 3.5
second delay.
Hold
1
Press Hold/Caller ID to put a call on Hold.
2
You can put down the handset without disconnecting the call.
3
Pick up the fax machine handset to release the call from Hold. Picking up an extension
handset will not release the call from Hold.
7 - 8
A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S
when you're finished. The