Memory Storage; Setting Tone/Pulse Dialing Mode; Setting Up Your Area Code (Usa Only) - Brother IntelliFAX 1575MC Owner's Manual

Memory Storage

In the event of a power failure, all settings in the INITIAL SETUP, SETUP
RECEIVE and SET AUTO DIAL plus the COVERPG SETUP and
COVERPAGE MSG (from SETUP SEND) operations are stored permanently. You
may have to reset the date and time.

Setting Tone/Pulse Dialing Mode

Your fax machine comes set to accommodate Tone (multi-frequency) dialing service.
If you have Pulse (rotary) dialing service, you need to change the dialing mode.
1
Press Menu/Set, 1, 5.
2
or
Press to select TONE or PULSE,
and then press Menu/Set.
3
Press Stop/Exit.

Setting Up Your Area Code (USA Only)

If you must dial the area code to call within your area code, do not enter this setting.
1
Press Menu/Set, 0, 2.
2
Use the dial pad to enter your area code,
and then press Menu/Set.
3
Press Stop/Exit.
4 - 6
I N I T I A L S E T U P