Table of Contents
Advertisement
Using the Quick-Scan/Reports Key
When you want to print a report, remove all paper from the ADF.
Note
Press Quick-Scan/Reports, press
press Menu/Set.
Seven reports are available:
Don't forget to set up the Fax Activity Report and Transmission Verification
Note
Report as explained on page 11-1.
or
to select the report you want, and then
Prints the Menu Table and programming
instructions so you can see at-a-glance how to
quickly program every menu selection.
Lists names and numbers stored in One Touch
and Speed Dial memory, in numerical order.
Lists information about the last 30 incoming
and outgoing faxes. TX means Transmit; RX
means Receive.
Prints a Transmission Verification Report for
your last transmission. This information will
remain until you pick up the handset or press
Speaker phone.
Prints the AUTO DIAL list (above)
alphabetically.
Lists settings for INITIAL SETUP, SETUP
RECEIVE, SETUP SEND, SETUP
REPORTS, SETUP MSG CTR and TEL
SERVICE.
Lists summary information of stored faxes and
the percentage of used memory.
P R I N T I N G R E P O R T S
11 - 2
Advertisement
Table of Contents
