Setting The Beeper Volume; Pabx And Transfer; Setting Pabx - Brother FAX-8350P Owner's Manual

Setting the Beeper Volume

You can set the beeper to LOW, HIGH or OFF. The machine comes
with this volume set to LOW. When the beeper is set to LOW or HIGH,
the machine beeps every time you press a key or make an error, and at
the end of sending or receiving a fax.
1
For the FAX-8350P, Press Menu, 1, 4.
For the MFC-9650/FAX-8750P, Press Menu, 1, 1, 4.
2
Press or to select your setting.
3
When the screen displays the setting you want, press Set.
4
Press Stop to exit.

PABX and TRANSFER

Your machine is initially set to be connected with PSTN (Public
Switched Telephone Network) lines. However, many offices use a central
telephone system or Private Automatic Branch Exchange (PABX). Your
fax can be connected to most types of PABX. The recall facility on your
fax machine supports timed break recall only (TBR), PBXS normally can
work with this for gaining access to an outside line, or for transferring a
call to another extension: The feature works when the R key is pressed.

Setting PABX

If your machine is connected to a PABX system, set PBX:ON. If not, set
OFF.
1
For the FAX-8350P, Press Menu, 1, 5.
For the MFC-9650/FAX-8750P, Press Menu, 1, 1, 5.
The screen displays
PBX:OFF
SELECT { } & SET
2
Press or to select ON (or OFF).
3
Press Set when the screen displays your selection.
4
Press Stop to exit.
You can program an R key press as part of a number stored in a One
Touch or Speed Dial location. When programming the One Touch or
Speed Dial number (Function menu 6-1 or 6-2) press R first (the screen
displays "!"), then enter the telephone number. If you do this, you do not
need to press R each time before you dial using a One Touch or Speed
Dial location. (See chap. 7.)
However, if PBX is set to OFF, you can't use the One Touch or Speed
Dial number that the R keypress is programmed into.
I N I T I A L S E T U P
35