Notice To Pc Users (For Fax-8750P Only); How To Attach The Filter Core To The Double Shielded Parallel I/F Cable - Brother FAX-8350P Owner's Manual

110
C H A P T E R T W E L V E
If you are using Windows
Computer. you may see "New Hardware Found Brother MFCXXXX"
during startup.
You can select "Do not install a driver (Windows
again)." and click OK, so Windows
again
—OR—
If you see "Update Device Driver Wizard", Click Next to bypass the
®
Windows Plug and Play Printer Driver screens, followed by Finish.
If you are using Windows
Wizard" during startup, follow the instructions from the installer, then
click Next. Click Finish when it appears on the screen.

Notice to PC Users (For FAX-8750P Only)

A small filter core and cable tie are enclosed in the vinyl bag with your
machine. PLEASE SAVE THESE PARTS. You will need them in the
future if you connect your machine with a Personal Computer. And for
optimal preformance, use the Double Shielded Parallel Interface Cable
with enclosed Filter core and Cable tie.
When you use a Personal Computer with your machine, please attach the
enclosed Filter core to Double Shielded Parallel I/f Cable.
How to Attach the Filter Core to the Double Shielded
Parallel I/f Cable:
1
Attach the Cable tie 50mm or less from Parallel Interface connector.
Double shielded
Parallel I/F cable
to MFC
Parallel Interface
connector
®
95, after you connect Brother machine to
®
will not display this dialog box
®
98, you may see the "Add New Hardware
Cable tie
®
will not prompt you
Cable tie
Double shielded
Parallel I/F cable